Design and technical data
All values from the manufacturer's data sheet, with a note where sources contradict each other.
Shear
- Cutting diameter, fresh wood
- 35 mm
- Weight
- 800 g
- Rated voltage
- 43.2 V DC
- Rated power
- 400 W
- Rated current
- 10 A
- Overcurrent protection
- ≥ 35 A
- Protection class
- II
- Shear type
- Bypass
- Handle
- Soft grip, non-slip
Battery
- Cell chemistry
- Lithium
- Capacity
- 4.8 Ah
- Voltage
- 43.2 V
- Weight
- 1.6 kg
- Operating time
- 8 to 10 h*
- Temperature range
- -10 to 50 °C
Charger
- Input
- 100 to 240 V AC, 50/60 Hz
- Output
- 50.4 V DC
- Charging current
- 1.0 A
- Protection class
- II
- Charging time
- 4 to 5 h
Note on the figures. The values come from the manufacturer's data sheet and are preliminary. *The data sheet states 8 h, the product description 8 to 10 h. For dry wood the documents give differing maximum values, so none is stated here. We will add both once the final data sheet arrives.
How the GM Cut-35 is built
The shear contains the motor and electronics. It is connected by cable to the battery, which sits in the pouch of the harness. The battery has a switch and a charge indicator.
The blade works on the bypass principle: two curved blades slide past each other. This gives a clean cut on living wood.
Care and maintenance
The tool kit contains a sharpening stone, grease, an oil bottle with needle tip and a wrench. Clean the blade after use, oil the joint, check screw connections regularly.
Documents and conformity
Still open. We do not yet have these documents in full. We will publish them here as soon as they have been checked, and claim nothing until then.
- EU declaration of conformity and CE documentation
- Documentation for battery and charger
- Operating manual in German
- Information on the take-back of electrical and battery devices
- Packaging registration